L2C26 - L2C26 Euro Profile Mortice Escape Sash Lock

Application

• This lock only requires a single hand operation to effect an exit and can be used on those escape doors which do not require exit devices to BS EN 1125 or BS EN 179
• For timber doors hinged on the left or right
• Also suitable for steel & composite doors - special, fixings required
• Sprung bolt-through lever handles must be used with this lock e.g. UNION 1000 series sprung furniture  

Specification

• Modular case range
• Easily reversible stainless steel latch bolt and escape
• Available with radiused or square forend and strike
• European style casing which accommodates most euro profile cylinders
• Single throw deadbolt gives 16mm projection when key is turned once
• Latch bolt withdrawn by sprung lever handle from both sides
• Deadbolt and latch bolt withdrawn simultaneously in a single operation by sprung inside lever handle
• Lock functionality is reliant on the users ability to correctly operate the lever handles
• Easily reversible handing of latch bolt and escape mechanism
• Pierced to accept bolt through furniture and security rose
• Supplied with split spindle to suit the majority of lever ­­­­­handles
• Backset: 55mm
• Centres: 72mm
• Cylinder Types: Euro profile (not supplied),
• Please refer to Mortice section, Architectural, for further details
• For details of J-1000 series sprung furniture please refer to Door Furniture section, Tubular Stainless Steel Furniture
• Note: Not for use on panic/emergency exit doors requiring exit devices to BS EN 1125 or BS EN 179
• Available in SS, PS and PB finishes

Finish

• SS - Stainless Steel
• PS - Polished Stainless Steel
• PB - Polished Brass finish

Standards

• Tested to BS EN 12209 : 2003
• EN 1634-1 assessed for use on 60 minute timber fire doors

  3

  M

  4

  1

  0

  F

  1

  B

  C

  2

  0

• EC Certificate number: 0832-CPD-6046
• Assists in fulfilling duties required under the Equality Act (EA)
• Satisfies recommendations of BS8300 and Approved Document M (ADM)