High security panic and emergency hardware

Exidor high-security two-point locking lever-operated emergency unit with shoot bolts. Non-handed, it is Ideal for limited access warehouse or commercial property, where greater intruder resistance is required.

The unit is operated by pushing down on the lever handle to retract the bolts, the bolts remain retracted until automatically released on the closing of the door.

Certified in compliance with EN 179 and suitable for use on FD30/FD60 timber doors and FD120/FD240 metal doors. 

Indicate the required finish when ordering.

Exidor high-security two-point locking lever-operated emergency unit with shoot bolts. Non-handed, it is Ideal for limited access warehouse or commercial property, where greater intruder resistance is required.

The unit is operated by pushing down on the lever handle to retract the bolts, the bolts remain retracted until automatically released on the closing of the door.

Certified in compliance with EN 179 and suitable for use on FD30/FD60 timber doors and FD120/FD240 metal doors. 

Indicate the required finish when ordering.

Exidor high-security two-point locking lever-operated emergency unit with shoot bolts. Non-handed, it is Ideal for limited access warehouse or commercial property, where greater intruder resistance is required.

The unit is operated by pushing down on the lever handle to retract the bolts, the bolts remain retracted until automatically released on the closing of the door.

Certified in compliance with EN 179 and suitable for use on FD30/FD60 timber doors and FD120/FD240 metal doors. 

Indicate the required finish when ordering.

Exidor high security three point locking lever operated emergency hardware with upper, lower and central shoot bolts.  Pushing the lever down retracts the shoot bolts which are kept retracted  until the door touches the frame as it completes its closing sweep.  Ideal for government or military buildings, where greater intruder resistance is required. Designed for use on doors up to 200kg and up to 1220mm wide, the bar can be cut to size on site to suit each door.  Supplied with timber or steel door keeps and fixings, alternative keeps are also available on request. Lever operation can be used on inward or outward opening doors.  Part of successful doorset testing to LPS 1175, certified in compliance with EN 179 and suitable for use on FD30/FD60 timber fire doors and FD120/FD240 metal fire doors. 

Exidor high security four point locking emergency unit with shoot bolts on all 4 door edges.  Pushing the lever handle retracts the shoot bolts which are kept retracted  until the door touches the frame as it completes its closing sweep.  Ideal for single doors on government or military buildings, where greater intruder resistance is required. Designed for use on doors up to 200kg and up to 1220mm wide, the bar can be cut to size on site to suit each door.  Supplied with timber or steel door keeps and fixings, alternative keeps are also available on request.  Has been part of successful LPS 1175 doorset testing, is certified in compliance with EN 179 and suitable for use on FD30/FD60 timber fire doors and FD120/FD240 metal fire doors. 

Exidor high security emergency unit  with 2 shoot bolts - lever handle operation suits  inward or outward opening doors.  Pushing the lever handle retracts the shoot bolts which are kept retracted until the door touches the frame during closing.  Ideal for property where greater intruder resistance is required. Designed for use on doors up to 1220mm wide, the bar can be cut to size on site to suit each door.  Supplied with timber or steel door keeps and fixings.  Certified in compliance with EN 179 and suitable for use on fire doors.

Exidor knob operated outside access device for the external opening of an escape door fitted with 700 series hardware, suitable for occasionally used additional entry points such as building side entrances.  The unit is operated by rotating the knob to retract the internal bolts, releasing the knob returns the internal bolts to the rest position. Locking the cylinder prevents entry into the building without compromising the operation of internal escape hardware.  Available with cylinder for immediate locking or without cylinder should masterkeyed system be needed.  Incorporates cylinder protection to prevent manipulation. Locking the cylinder prevents access into the building but will not prevent escape from the building.  Certified as an approved accessory to the 700 series hardware as part of EN 1125 and EN 179 and suitable for use on fire doors.

Exidor high-security lever-operated outside access device for 700 series is the means to make an escape door an access door, ideal for additional entry points such as car park or smoking area access doors.  Principle attack areas are protected with high-security features and manufactured from stainless steel to help prevent force and drill attacks.  The unit is operated by pushing the lever down to retract the internal bolts/latches, releasing the lever returns the internal bolts/latches to the rest position. Available with or without a Euro cylinder. Locking the cylinder prevents access into the building but will not prevent escape from the building. Certified as an approved accessory to the 700 series hardware as part of EN 1125 and EN 179. Tested to LPS 1175 SR4 grade. Lever design helps meet the requirements of BS 8300 and Approved Document M, giving barrier-free access.

Exidor high security panic push bar set for double doors comprising 701B/30 1 point shootbolt (active leaf) and 702B/30 2 point shoot bolts (inactive leaf).  Pushing the bar towards the door retracts the shoot bolts which are kept retracted until the door touches the frame as it completes its closing sweep.  Ideal for large capacity public venues such as sports arenas, where greater intruder resistance is required. Designed for use on doors up to 200kg and up to 1220mm wide, the bars can be cut to size on site to suit each door.  Supplied with timber or steel door keeps and fixings, alternative keeps are also available on request.  Certified in compliance with EN 1125 and suitable for use on FD30/FD60 timber fire doors and FD120/FD240 metal fire doors. 

Exidor high security panic push bar set for double doors comprising 701B/30 1 point shootbolt (active leaf) and 702B/30 2 point shoot bolts (inactive leaf).  Pushing the bar towards the door retracts the central horizontal shoot bolt which is kept retracted by the upper rod mechanism until the door touches the frame as it completes its closing sweep.  Ideal for large capacit public venues such as sports arenas, where greater intruder resistance is required. Designed for use on doors up to 200kg and up to 1220mm wide, the bars can be cut to size on site to suit each door.  Supplied with timber or steel door keeps and fixings, alternative keeps are also available on request.  Certified in compliance with EN 1125 and suitable for use on FD30/FD60 timber fire doors and FD120/FD240 metal fire doors. 

Exidor high security two point locking panic push bar with upper and lower shoot bolts.  Pushing the bar towards the door retracts the shoot bolts which are kept retracted  until the door touches the frame as it completes its closing sweep.  Ideal for government or military buildings, where greater intruder resistance is required. Designed for use on doors up to 200kg and up to 1220mm wide, the bar can be cut to size on site to suit each door.  Supplied with timber or steel door keeps and fixings, alternative keeps are also available on request.  Certified in compliance with EN 1125 and suitable for use on FD30/FD60 timber fire doors and FD120/FD240 metal fire doors.