2349 / L2349 - Euro Profile Mortice Night Latch Application For timber doors hinged on the left or right Also suitable for steel & composite doors - special fixings required Specification Latch bolt withdrawn by euro profile cylinder from outside and sprung lever handle or separate turn from inside Latch bolt is held in the withdrawn position by use of special key supplied (7126-30) Reversible latch bolt Cylinder options - single cylinder or key and key Latch bolt is automatically locked against end pressure by the anti-thrust bolt 2349 supplied with 2X20 cylinder Available with square forend and striking plate Case Szie: 77.5mm (3") Backset: 57mm Case: Steel, silver powder coat Outer Forend: Stainless steel or brass Striking Plate: Finished to match forend Deadbolt: n/a Latch Bolt: Brass, reversible Follower: Steel, 8mm square Rebate Kit: 2942 (13mm, 19mm or 25mm) Cylinder Type: 2349 supplied with 2X20 cylinder, L2349 euro profile (not supplied) Available in SC and PL finishes Finish SC - Satin Chrome finish PL - Polished Brass finish Standards Download 2349 / L2349 - Euro Profile Mortice Night Latch (.pdf, 186 kB) Close Ordering Options JL2349-PL-3.00 EU.PROF.CYL MORT. N.LATCH CW ANTITHRUST, PB, 3"CASE, C.ONLY JL2349-SC-3.00 EU.PROF.CYL MORT. N.LATCH CW ANTITHRUST, SS, 3"CASE, C.ONLY Close 2169 / L2169 - Euro Profile Small Case DeadlockFor timber doors hinged on the left or right Also suitabl… 2041 / L2041 - Oval Profile Horizontal Mortice LockFor timber doors hinged on the left or right Also suitabl… 2449 - Euro Profile Sliding Door LockFor timber doors hinged on the left or right