L2370 - Mortice Night Latch Application For timber doors hinged on the left or right and requiring cylinder and lever handle operation Also suitable for steel & composite doors - special fixings required Accepts oval or euro profile cylinders For use with sprung or unsprung lever furniture from inside. Please specify when ordering Specification Heavy duty springing suitable for use in heavy traffic areas Latch bolt withdrawn by lever handle from inside and key from outside or by key from either side Separate cylinder options - oval or euro profile, key and turn or key and key Latch bolt is automatically locked against end pressure by the anti-thrust bolt Case Size: 94.5 or 114.5mm Backset: 60 or 80mm Case: Steel, gold powder coat. Pierced to accept bolt through furniture on 38mm centres. Pierced to accept oval & euro cylinders Outer Forend: Stainless steel or brass Striking Plate: Finished to match outer forend Latch Bolt: Brass, easily reversible from outside of the case Follower: Brass, 8mm square. One way action Rebate Kit: 2936 (13, 19 or 25mm sizes). PL finish only available in 25mm Cylinder Type: Euro / oval profile (not supplied) Anti-thrust Slide: Effective at door gaps up to 6mm Finish SC - Satin Chrome finish PL - Polished Brass finish Standards Download L2370 - Mortice Night Latch (.pdf, 175 kB) Close Ordering Options JL2370-SC-60 2D2 DUAL PROF. CYL MORT. N.LATCH, SS, 60MM B.SET, JL2370-SC-80 2D2 DUAL PROF. CYL MORT. N.LATCH, SS, 80MM B.SET, JL2370-PL-60 2D2 DUAL PROF. CYL MORT. N.LATCH, PB, 60MM B.SET, JL2370-PL-80 2D2 DUAL PROF. CYL MORT. N.LATCH, PB, 80MM B.SET, Close L2264 - Mortice Sash Lock - with Cylinder to Latch Function L2170 - Mortice Deadlock L2070 - Horizontal Sash Lock - Lever Handle Operation