L2270 - Mortice Sash Lock Application For timber doors hinged on the left or right and requiring cylinder and lever handle operation Also suitable for steel & composite doors - special fixings required Accepts oval or euro profile cylinders For use with sprung or unsprung lever furniture from either side. Please specify when ordering Specification Heavy duty springing suitable for use in heavy traffic areas Deadbolt locked or unlocked by cylinder key or cylinder turn Latch bolt withdrawn by lever handles from either side Separate cylinder options - oval or euro profile, key and turn or key and key 21mm extended throw deadbolt Case Size: 94.5 or 114.5mm Backset: 60 or 80mm Case: Steel, gold powder coat. Pierced to accept bolt through furniture on 38mm centres. Pierced to accept oval & euro cylinders Outer Forend: Stainless steel or brass Striking Plate: Finished to match outer forend Deadbolt: Brass, with hardened steel rollers Latch Bolt: Brass, easily reversible from outside of the case Follower: Brass, 8mm square. One way action Rebate Kit: 2936 (13, 19 or 25mm sizes). PL finish only available in 25mm Cylinder Type: Euro / oval profile (not supplied) Available in SC and PL finishes Finish SC - Satin Chrome finish PL - Polished Brass finish Standards Download L2270 - Mortice Sash Lock (.pdf, 181 kB) Close Ordering Options JL2270-PL-60 CYL MORTICE LOCK(2D2) JL2270-SC-60 CYL MORTICE LOCK(2D2) JL2270-SC-80 CYL MORTICE LOCK(2D2) Close L2282 - Mortice Sash Lock - Knob Operation L2070 - Horizontal Sash Lock - Lever Handle Operation L2170 - Mortice Deadlock