L2C26 - L2C26 Euro Profile Mortice Escape Sash Lock

5_Year_Guarantee.jpg CE_Logo.jpg Wheelchair_symbol.jpg


  • This lock only requires a single hand operation to effect an exit and can be used on those escape doors which do not require exit devices to BS EN 1125 or BS EN 179
  • For timber doors hinged on the left or right
  • Also suitable for steel & composite doors - special, fixings required
  • Sprung bolt-through lever handles must be used with this lock e.g. UNION 1000 series sprung furniture  


  • Modular case range
  • Easily reversible stainless steel latch bolt and escape
  • Available with radiused or square forend and strike
  • European style casing which accommodates most euro profile cylinders
  • Single throw deadbolt gives 16mm projection when key is turned once
  • Latch bolt withdrawn by sprung lever handle from both sides
  • Deadbolt and latch bolt withdrawn simultaneously in a single operation by sprung inside lever handle
  • Lock functionality is reliant on the users ability to correctly operate the lever handles
  • Easily reversible handing of latch bolt and escape mechanism
  • Pierced to accept bolt through furniture and security rose
  • Supplied with split spindle to suit the majority of lever ­­­­­handles
  • Backset: 55mm
  • Centres: 72mm
  • Cylinder Types: Euro profile (not supplied),
  • Please refer to Mortice section, Architectural, for further details
  • For details of J-1000 series sprung furniture please refer to Door Furniture section, Tubular Stainless Steel Furniture
  • Note: Not for use on panic/emergency exit doors requiring exit devices to BS EN 1125 or BS EN 179
  • Available in SS, PS and PB finishes


  • SS - Stainless Steel
  • PS - Polished Stainless Steel
  • PB - Polished Brass finish


  • Tested to BS EN 12209 : 2003
  • EN 1634-1 assessed for use on 60 minute timber fire doors
  • EC Certificate number: 0832-CPD-6046
  • Assists in fulfilling duties required under the Equality Act (EA)
  • Satisfies recommendations of BS8300 and Approved Document M (ADM)

Get in touch

Contact us