L2C26 - L2C26 Euro Profile Mortice Escape Sash Lock - General Exit Hardware - UNION – Door Handles, Door Locks, Door Hardware and much more

This lock only requires a single hand operation to effect an exit and can be used on those escape doors which do not require exit devices to BS EN 1125 or BS EN 179
For timber doors hinged on the left or right
Also suitable for steel & composite doors - special, fixings required
Sprung bolt-through lever handles must be used with this lock e.g. UNION 1000 series sprung furniture

Modular case range
Easily reversible stainless steel latch bolt and escape
Available with radiused or square forend and strike
European style casing which accommodates most euro profile cylinders
Single throw deadbolt gives 16mm projection when key is turned once
Latch bolt withdrawn by sprung lever handle from both sides
Deadbolt and latch bolt withdrawn simultaneously in a single operation by sprung inside lever handle
Lock functionality is reliant on the users ability to correctly operate the lever handles
Easily reversible handing of latch bolt and escape mechanism
Pierced to accept bolt through furniture and security rose
Supplied with split spindle to suit the majority of lever handles
Backset: 55mm
Centres: 72mm
Cylinder Types: Euro profile (not supplied),
Please refer to Mortice section, Architectural, for further details
For details of J-1000 series sprung furniture please refer to Door Furniture section, Tubular Stainless Steel Furniture
Note: Not for use on panic/emergency exit doors requiring exit devices to BS EN 1125 or BS EN 179
Available in SS, PS and PB finishes

Tested to BS EN 12209 : 2003
EN 1634-1 assessed for use on 60 minute timber fire doors

3 M 4 1 0 F 1 B C 2 0
EC Certificate number: 0832-CPD-6046
Assists in fulfilling duties required under the Equality Act (EA)
Satisfies recommendations of BS8300 and Approved Document M (ADM)

L2C26 - L2C26 Euro Profile Mortice Escape Sash Lock