L2370 - Mortice Night Latch Application For timber doors hinged on left or right & requiring cylinder & lever handle operation Also suitable for steel & composite doors - special fixings required For use with sprung or unsprung lever furniture from inside. Please specify when ordering Specification Heavy duty springing suitable for use in heavy traffic areas Latch bolt withdrawn by lever handle from inside & key from outside or by key from either side Separate cylinder options - oval or euro profile, key & turn or key & key Latch bolt is automatically locked against end pressure by the anti-thrust bolt Case Size: 94.5mm or 114.5mm Backset: 60mm or 80mm Case: Steel, gold powder coat. Pierced to accept bolt through furniture on 38mm centres. Pierced to accept oval & euro cylinders (not supplied) Outer Forend: Stainless steel or brass Striking Plate: Finished to match outer forend Latch Bolt: Brass, easily reversible from outside of the case Follower: Brass, 8mm square. One way action Anti-thrust Slide: Effective at door gaps up to 6mm Finish SC - Satin Chrome finish PL - Polished Brass finish Standards Downloads L2370 - Mortice Night Latch (.pdf, 187 kB) Close Ordering Options JL2370-PL-60 Mortice Nightlatch - Case Only JL2370-SC-60 Mortice Nightlatch - Case Only JL2370-SC-80 Mortice Nightlatch - Case Only Close L2264 - Mortice Sash Lock - with Cylinder to Latch Function L2070 - Horizontal Sash Lock - Lever Handle Operation L2282 - Mortice Sash Lock - Knob Operation