ASSA ABLOY Angle bracket A104

For use with sliding arms. For fitting to door frame over 25mm in depth on push side. Used with ASSA ABLOY DC500 and DC700 Door Closers and ASSA 330 and 250 Door Closers.

ASSA ABLOY Mounting plate A120

For smoke protection doors. Used with ASSA ABLOY DC200 and DC300 Door Closers.

ASSA ABLOY Mounting plate A121

ASSA ABLOY Angle bracket A122

For frame installation with deep jamb. Reduces headroom by 70mm; check for suitability on fire doors. Used with ASSA ABLOY 200.

ASSA ABLOY Angle bracket A123

For frame installation with deep jamb. Reduces headroom by 70mm; check for suitability on fire doors. Used with ASSA ABLOY DC300.

ASSA ABLOY Mounting plate A130

For metal or timber profile doors. Used with ASSA ABLOY DC340, DC500 and DC700 door closers and ASSA 335 and 330 door closers.

ASSA ABLOY Mounting plate A131

ASSA ABLOY Mounting plate A132

ASSA ABLOY Hold-open device A152

Allows the door to be held in the open position up to 130º. For use with DC194/G195 arm. Not approved for use on fire or smoke doors.

ASSA ABLOY Opening damper A153

Provides enhanced backcheck function to a maximum damping angle of 130º. For use with DC194/G195 arm. Please note use of a floor or wall mounted door stop is still recommended.

ASSA ABLOY Parallel arm bracket A154

For parallel arm installation (Figure 66). Used with ASSA ABLOY DC200 and DC300.

ASSA ABLOY Link arm L190

Supplied as standard with many door closer. Allows door to open to 180º.

ASSA ABLOY Hold-open link arm L191

Allows the door to be held in the open position to a maximum of 150º, either to allow for cleaning or to permit easier passage at certain times. Not permitted on fire-resisting doors.

ASSA ABLOY Guide rail G193

ASSA ABLOY Guide rail G195